T99 Mk3 (version 4 frame)
_________________________
This model has a cockpit that will fit a 1:24 human pilot figure inside. I recommend Kotobukiya's line of figures but anything in that scale should fit inside
_________________________
STL files here:
https://drive.google.com/drive/folders/1Ww_MDKlXTwvMWZjKegtd5Snt0KHnK5dW?usp=sharing
_________________________
The model is a 3D printable action figure. It will require:
- Superglue (Cyanoacrelate)
- M3 nuts and bolts in 15 mm. ,20 mm. and 30. mm
_________________________
NOTE:
- Internal structure should be printed as SOLID using PETG or ABS as they take a lot of stress
- Duplicated parts will only have ONE file. You will need to print out copies yourself - Hex socketed bolt work best, but feel free to try flat or Phillips
- MOST parts should print fine on FDM printer with minimal support
- Scaled up or down the print will make the model incompatible with M3 bolts