FEATURED
Only 99 left
Add to cart
NIssan 240SX S13 (1989-1993) Ash Tray Cup Holder
$10
$10
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. Truck bed liner spray paint almost on everything. Check out Hillsong - Beneath The Waters (I Will Rise) its on Youtube.
*200 songs list included!
Only 25 left
Add to cart
1992-1995 Honda Civic EG Gauge Holder For Climate Control: 3-52mm Blac
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. As with all my gauge holder made it big so just shove in and it will stay. Also have gauge holder for the radio.
Only 25 left
Add to cart
240SX S13 (1989-1993) Middle Vent: 3-52mm / Vents
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black NO GAUGES. I'm using truck bedliner spray paint on almost everything.
Only 25 left
Add to cart
240SX S13 (1989-1993) SR20DET Spark Plug Cover: Classic Silvia Black
$50
$50
Get this!
+ Add to cart
Textured black 18 gauge thick metal. Also have other versions and for S14.
Only 24 left
Add to cart
AE86 Gauge Holder: 3-52mm Plus Lighter
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. I'm using truck bed liner spray paint almost on everything.
Only 25 left
Add to cart
240SX S13 / S14 (1989-1998) Bottom Boot Cover Ring: Ring Only Black
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything.
Only 25 left
Add to cart
240SX S14 (1995-1998) SR20DET Spark Plug Cover: Old Nismo with Vents
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want an all textured black one or high heat satin all black leave a message.
Only 25 left
Add to cart
1992-1995 Honda Civic EG Gauge Holder For The Radio: 3-52mm
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black. Like on all my gauge holder made it big so you just shove in and it stays. Also fits Honda CRX radio and also have for climate control. Also have in bare aluminum for $18 ship and gauge holder for the climate and 2-52mm.
Only 25 left
Add to cart
BMW E36 Bottom Gauge Holder: 3-52mm & 4-Toggle
$25
$25
Get this!
+ Add to cart
18 gauge thick metal textured black. Like on all my gauge holder made it big so you just shove in and it stays. If you want a blank one buy and leave a message you want blank. I can see your ebay ID so will know who you're. Also have the half version.
Only 25 left
Add to cart
BMW E34 5 Series Gauge Holder * Black for 5-Speed
$30
$30
Get this!
+ Add to cart
18 gauge thick metal textured black truck bedliner spray paint which you can also get Walmart or Home Depot for any touch up. Walmart is cheaper. If you want any special layout shoot a message I can see your ebay ID. This panel came off 1995 fits the stock sifter boot cover and button.
Only 25 left
Add to cart
80cc Bicycle Motor Mount ONLY
$30
$30
Get this!
+ Add to cart
You're buying last pic motor mount bracket ONLY for 80cc bicycle motor kit to put on go kart. Textured black 3/16 thick metal. The mounting holes are for 5/16 size bolts and side reinforcement weld grinded down to flush clean.
Only 25 left
Add to cart
1990-1997 Mazda Miata Dual Cup Holder Black
$10
$10
Get this!
+ Add to cart
It kind of stay but if you want it to be stronger add some kind of adhesive or drill and put screws if you want. 18 gauge thick textured black.
Only 25 left
Add to cart
240SX S13 (1989-1993) Arm Rest Cup Holder Black
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black. You shove in and it gets stuck on top. Also have S14.
Only 24 left
Add to cart
BMW E36 M3 Diffuser *Metal
$300
$300
Get this!
+ Add to cart
18 gauge thick metal flat black hardware provided. If you want out of aluminum will be $350 ship shoot a message I can see your ebay ID. Four mounting nuts and bolts on the wheel compartment and two on each end of bumper. This E36 is M3 you can buy the M3 lip add on.
Only 25 left
Add to cart
240SX S13 (1989-1993) Cluster Gauge Holder: Two 3.375 and 2- 52mm
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Also have for S14 and other versions.
Only 25 left
Add to cart
BMW E30 (1984-1991) Ash Tray Into 2-52mmON LEFT Plus Lighter LHD Black
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. I'm using truck bed liner spray paint almost on everything which you can get from Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Pickup Truck Shovel & Axe Mounting Brackets *Nuts and Bolts Included
$40
$40
Get this!
+ Add to cart
1/8 thick metal textured black truck bed spray paint. Already been assembled mounting nuts and bolts provided. They deleted my Youtube account for posting New World Order stuff. It fits the Husky axe at Home Depot and you can lock it.
Only 25 left
Add to cart
240SX S13 (1989-1993) Middle Vent Gauge Holder: Dual 52mm with S-13
$15
$15
Get this!
+ Add to cart
Ttextured black 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Like on all my gauge holder made it big so just shove in and it stays. Leave address and Paypal email so can know who is who and can ship it.
Only 25 left
Add to cart
BMW E30 (1984-1991) Cluster Gauge Holder: Two 3.375 and Two 52mm Black
$25
$25
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. If you want any kind of special layout or blank one or no paint shoot me a message. I'm using truck bed liner spray paint almost on everything. Top goes into stock place and bottom two screws provided to go into bottom of dash.
Only 25 left
Add to cart
240SX S13 (1989-1993) 3-Piece Cooling Plate Set for Silvia Front End
$90
$90
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Link to second ebay for more pics but was taken down by ebay: www.ebay.com/itm/393171852080
Only 25 left
Add to cart
240SX S13 (1989-1993) 4-Key Holder 8.30
$20
$20
Get this!
+ Add to cart
18 gauge thick metal textured black. I'm using truck bed liner spray paint on almost everything in case you need any touch up but bedliner is tough. Wal-Mart is $1 cheaper than Home Depot or Lowe's. Screws provided. Also have Acura Integra, Acura TL, BMW E30.
Only 25 left
Add to cart
BMW E30 M3 2-Key Holder 10
$25
$25
Get this!
+ Add to cart
Textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Also have 240SX, E30, E36 etc.
Only 25 left
Add to cart
240SX S13 Whole Middle Panel Plate: Blank For Left Hand Drive
$30
$30
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. I'm using truck bed liner spray paint almost on everything. You lay on top of your stock panel and check out the Silvia and others for more pics. Also have for right hand drive.
Only 25 left
Add to cart
240SX S13 (1989-1993) Underneath Middle Panel Plate:3-52 & 8-Toggle Sw
$27
$27
Get this!
+ Add to cart
18 gauge thick metal textured black truck bedliner spray paint. You will need to trim the stock storage compartment.
Only 25 left
Add to cart
240SX S13 (1989-1993) Radio Brackets Set Pair Black
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
240SX S14 (1995-1998) SR20DET Spark Plug Cover: Silvia
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want an all textured black one or high heat satin all black leave a message. Push down to mold/contour.
Only 25 left
Add to cart
240SX S13 (1989-1993) SR20DET Spark Plug Cover: Silvia
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want an all textured black one or high heat satin all black leave a message.
Only 25 left
Add to cart
Radio Gauge Pod Holder 1996-1998 Honda Civic: 3-52mm
$15
$15
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Like on all my gauge holder made it big so just shove in and it stays.
This was for 1998 Honda Civic sedan but should fit other years and models as well.
Only 25 left
Add to cart
240SX S13 (1989-1993) SR20DET Spark Plug Cover: GReddy With Vent
$50
$50
Get this!
+ Add to cart
Front is bare metal coated high temp satin clear to protect from rust and back is textured black. If you want an all textured black one or high heat satin all black leave a message. If you want custom shoot a message also have old nismo vents and others.
Only 25 left
Add to cart
Nissan 240SX S13(1989-1993) Engine Harness Lifted Up Plate for Big Rim
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
BMW E36 Storage Compartment Gauge Holder: 3-52mm & 4-Toggle *Half Vers
$25
$25
Get this!
+ Add to cart
18 gauge thick metal textured black. Like on all my gauge holder made it big so you just shove in and it stays. If you want a blank one buy and leave a message you want blank or no toggle etc. Also have a full version.
Only 25 left
Add to cart
BMW E30 (1984-1991) Gauge Holder By Ash Tray: 3-52mm Left hand drive
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. Made it big so you just shove in and it will stay and can flip it around for right hand drive.
Only 25 left
Add to cart
240SX S14 (1995-1998) Muffler Heat Shield: *ALUMINUM!
$35
$35
Get this!
+ Add to cart
5052 bare aluminum no paint since aluminum doesn't rust and lighter than metal. Also have for S13 hatch and coupe in metal for $30 ship.
Only 25 left
Add to cart
240SX S13 (1989-1993) Cluster Gauge Holder: Blank Black
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
1990-1997 Mazda Miata Middle Vent Gauge Holder Set Two 52mm Black
$10
$10
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal a set for two.
Only 25 left
Add to cart
240SX S13 (1989-1993) Whole Middle Panel Plate: 240SX Black
$30
$30
Get this!
+ Add to cart
18 gauge thick textured black and if you want any special kind of layout shoot a message. Doesn't come with the green vinly and you lay on top of your stock panel. Screws provided if you don't want 240SX cut out buy and leave a message.
Only 25 left
Add to cart
240SX S13 (1989-1993) SR20DET Spark Plug Cover: 180SX
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want an all textured black one or high heat satin all black leave a message. If you want any custom shoot a message.
Only 25 left
Add to cart
S13 (1989-1993) Middle Vent Gauge Holder: Dual S13 52mm *Bare Metal
$15
$15
Get this!
+ Add to cart
Back is textured black front bare metal coated high temp clear to protect from rust. 18 gauge thick sheet metal also have in black. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
S13 (1989-1993) Whole Middle Panel Plate: 3-52mm On The Bottom
$30
$30
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Also have other versions and if you need right hand drive shoot a message. You lay on top of your stock panel and screws provided. You will need to trim your stock panel to fit the 52mm.
Only 25 left
Add to cart
S13 (1989-1993) Middle Vent Gauge Holder: Dual With Lines 52mm
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart cheaper than Home Depot or Lowe's if you need any touch up. As with all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
1997 Honda Civic Gauge Pod Holder: Three 52mm & 5 Toggle Switches
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Brackets and screws provided to mount.
Only 25 left
Add to cart
240SX S13 (1989-1993) Cluster Gauge Holder: 3.375 & 4-52mm
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
BMW E30 (1989-1991) Front Bumper Valance Bottom Vent Grill: Metal Flat
$25
$25
Get this!
+ Add to cart
High heat flat black 18 gauge thick sheet metal second pic you're buying. Two tat screws provided unbreakable since metal and can offer cheaper as well than OEM. Also if you want blank leave a message and have block off fog lights as well check that out.
Only 25 left
Add to cart
40SX S13(1989-1993)Whole Middle Panle Plate:No 240SX etc. cutout
$30
$30
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. I'm using truck bed liner spray paint almost on everything. You lay on top of your stock panel and check out. This one is for left hand drive and also have for right hand drive.
Only 25 left
Add to cart
240SX S13 (1989-1993) Brake Master Cylinder Heat Shield: Bare Metal
$20
$20
Get this!
+ Add to cart
Also have in metal high heat flat black for same price and in bare aluminum and black aluminum for $25 ship. There also four versions for S14. 18 gauge thick metal high heat satin clear to protect from rust.
Only 25 left
Add to cart
Racing Air Filter Adapter Ring For 49, 50, 80cc Bicycle Motor Kit
$8
$8
Get this!
+ Add to cart
18 gauge thick metal charcoal black. It is to put racing air filter on stock carburetor.
*Will come in regular size mail envelope cut on the edge to open since 10/4 warning nuke and songs list inside. I get these out the next day to post office.
Only 25 left
Add to cart
S13 (1989-1993) Brake Master Cylinder Heat Shield: Metal Black
$20
$20
Get this!
+ Add to cart
For Nissan S13 (1989-1993).
18 gauge thick metal high heat flat black. Also have in aluminum and bare aluminum and there also four versions for S14.
Only 25 left
Add to cart
Predator 212cc Chain Guard For Go Kart Escalade Powerwheels!
$18
$18
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal no need to take out clutch to install. You do the bending yourself by hand since yours may be different. Bolt the three bolts first then do the bend. Also selling sprockets, muffler heat shield etc. for Escalade.
Only 25 left
Add to cart
S13 (1989-1993) Whole Middle Panel Plate: 240SX
$30
$30
Get this!
+ Add to cart
Front is bare metal coated high temp satin clear to protect from rust. Back is textured black. Will come with screws. Also have other versions and if you want in black or any special layout shoot me a message. You lay on top of your stock panel. Also have a black one check that one out.
Only 25 left
Add to cart
240SX S14 (1995-1998) After Market Air Filter Mount Bracket Black
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. If you get messed up can shooting air turn upside down.
Only 24 left
Add to cart
S13 (1989-1993) Battery Block Off Set Driver & Passenger *NO PAI
$60
$60
Get this!
+ Add to cart
18 gauge metal no paint.
Only 25 left
Add to cart
240SX S13 (1989-1993) Front Windshield Defroster Vent LHD Black
$50
$50
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal longer 10 size screws provided. Stick the screws in the holes first. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Nissan 240SX S13 (1989-1993) AC Middle Vent and Passenger Vent: Lines
$20
$20
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal for middle vent and passenger. If you want driver side vent too have that too. I'm using truck bed liner spray paint almost on everything. As with all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
1995 Honda Civic Coupe Sunroof Delete for Roll Cage *Bare Aluminum
$140
$140
Get this!
+ Add to cart
Bare aluminum no paint also have for Nissan 240SX S13 (1989-1993) hatch. Rivets included.
Only 25 left
Add to cart
S13 (1989-1993) SR20DET Spark Plug Cover: Old Nismo With Vent
$50
$50
Get this!
+ Add to cart
Front is bare metal coated high temp satin clear to protect from rust and back is textured black. If you want an all textured black one or high heat satin all black leave a message. If you want custom shoot a message.
Only 25 left
Add to cart
S13 (1989-1993) Hydrualic E-Brake Bracket Driver For Cheap Hydro On Eb
$50
$50
Get this!
+ Add to cart
This if for the cheap hydro on ebay for around $40 and for driver side. You can just flip around for right hand drive.
3/16 thick metal textured black and also have for passenger and for Wilwood hydro. You're buying the bracket mount ONLY. The cheap hydro I brought on ebay for around $40.
Only 25 left
Add to cart
S13 (1989-1993) Cluster Gauge Holder: RacePak Black LHD
$25
$25
Get this!
+ Add to cart
For Nissan 240SX S13 (1989-1993).
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Also have other versions.
Only 25 left
Add to cart
240SX S13 (1989-1993) Muffler Heat Shield: Coupe Black
$30
$30
Get this!
+ Add to cart
18 gauge thick metal high heat flat black. Also have for hatch and S14 and E30.
Only 25 left
Add to cart
BMW E30 (1984-1991) Cup Holder
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from Home Depot or Lowe's if you need any touch up. Walmart cheaper also have two 52mm without cigarette lighter.
Only 25 left
Add to cart
After Market Steering Wheel Hub Block Off: Circle Plate
$10
$10
Get this!
+ Add to cart
18 gauge thick metal high heat flat black. Only the circle plate you're buying and also have the E46 racepak mount and e46 gauge holder there.
Only 25 left
Add to cart
1992-1995 Honda Civic EG Gauge Holder For Climate Control: Two 52mm Bl
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything if you need touch up. As with all my gauge holder made it big so just shove in and it will stay. Also have gauge holder for the radio and bare aluminum for $18 ship.
Only 25 left
Add to cart
S13 (1989-1993) Cluster Gauge Holder: 3-52mm & 2-3.375 Black
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything if you need any touch up. Also have other versions check those out for more pics.
Only 25 left
Add to cart
1995 Honda Civic Gauge Holder For The Radio: Two 52mm Black
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Also have 3-52mm check that one out for more pics inside car and also have gauge holder for climate. Also have bare aluminum for $18 ship.
Only 25 left
Add to cart
240SX S14 (1995-1998) Brake Master Cylinder Heat Shield: Bare Aluminum
$25
$25
Get this!
+ Add to cart
5052 bare aluminum no paint as in pic since aluminum doesn't rust and lighter than metal. Also have in black and in metal for $20 ship. There are also four versions for S13. Check out the black metal for more pics inside car.
Only 25 left
Add to cart
BMW E30(1984-1991) Ash Tray Into Gauge Holder: 2-52mm Plus Lighter RHD
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. If you want any kind of special layout shoot me a message. I'm using truck bed liner spray paint almost on everything which you can get from Home Depot or Lowe's if you need any touch up. Two screws provided.
Only 25 left
Add to cart
Batman Toilet Paper Holder
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black and two screws provided to mount. DOES NOT COME WITH THE WHITE BAR YOU USE YOUR OLD ONE or the 99 cents stores sell them two bar for a $1.
Only 25 left
Add to cart
S13 (1989-1993) Middle Panel Plate: Blank
$30
$30
Get this!
+ Add to cart
18 gauge thick metal textured black. Two pins to lock underneath on top just shove in and it stays.
Only 25 left
Add to cart
BMW E30 (1984-1991) Ash Tray Into 2-Cup Holder Plus Lighter LHD
$20
$20
Get this!
+ Add to cart
For left hand drive.
18 gauge thick metal textured black. It locks on the bottom with tab and two screws provided to put on top. Cut the bottom stock panel if you want the cups to sink lower.
Only 25 left
Add to cart
Batman Napkin / Mail Holder
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black. I'm using truck bed liner spray paint almost on everything which you can get from WalMart cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Harbor Freight Predator Engine 212cc Engine Motor Mount Plate 6.5HP
$20
$20
Get this!
+ Add to cart
1/8 thick bare metal.
Only 25 left
Add to cart
S14 (1995-1998) Brake Master Cylinder Heat Shield: *Aluminum Black
$25
$25
Get this!
+ Add to cart
5052 aluminum high heat flat black and aluminum lighter than metal. Also have in bare aluminum and in metal for $20 ship. There are also four versions for S13. I elevated back bolt so can drop down lower to better protect underneath.
Only 25 left
Add to cart
S13 (1989-1993) SR20DET Spark Plug Cover: SR20DET
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want an all textured black one or high heat satin all black leave a message.
Only 25 left
Add to cart
BMW E30 (1984-1991) Cluster Gauge Holder: Blank LHD
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything f you need any touch up. Top goes into stock place and bottom two screws provided to go into bottom of dash. For left hand drive can RHD shoot a message.
Only 25 left
Add to cart
Nissan 240SX S13(1989-1991)Hatch Sunroof Block Off *Aluminum w/Rivets
$140
$140
Get this!
+ Add to cart
Bare aluminum thick as the 18 gauge metal. 21 rivets included giving you one extra in case and gave plenty of room to rivet. Didn't test on coupe and S14 but you can test there measurements in pic above and its half an inch in for the mounting holes.
Only 25 left
Add to cart
BMW E30 (1984-1991) Middle Panel Plate: Blank Black
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. If you want any kind of special layout or don't paint it shoot me a message.
Only 25 left
Add to cart
240SX S14 (1995-1998) Front Windshield Defroster Vent *Black
$50
$50
Get this!
+ Add to cart
For Nissan 240SX S14.
18 gauge thick metal textured black two longer mounting screws provided. Stick the screws in the holes first as in pic above. Also have for S13.
Only 25 left
Add to cart
S13 (1989-1993) Brake Master Cylinder Heat Shield: BARE ALUMINUM!
$25
$25
Get this!
+ Add to cart
For S13 (1989-1993).
5052 bare aluminum no paint as in pic since aluminum doesn't rust and lighter than metal. Also have in black and in metal for $20 ship. There are also four versions for S14.
Only 25 left
Add to cart
S13 (1989-1993) SR20DET Spark Plug Cover: I Heart Haters
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want all black shoot me a message.
Only 24 left
Add to cart
BMW E30 (1984-1991) Cluster Gauge Holder: 3.375 & 4-52mm LHD
$25
$25
Get this!
+ Add to cart
Textured black 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from Home Depot or Lowe's if you need any touch up.Top goes into stock place and bottom two screws provided to go into bottom of dash. For left hand drive.
Only 25 left
Add to cart
240SX S13 Underneath Middle Panel Plate:3-52 & 8-Toggle Switch Black
$27
$27
Get this!
+ Add to cart
18 gauge thick metal textured black truck bedliner spray paint. You will need to trim the stock storage compartment. Link to ebay for more pics: www.ebay.com/itm/393416428372
Only 25 left
Add to cart
Honda Civic EG 1995 Radio Switch Holder ONLY Plate
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 1 left
Add to cart
Nissan Truck Harbody Hood Hinges Set Both Sides
$60
$60
Get this!
+ Add to cart
Used next day shipping located in Long Beach, CA.
Sold going to use for something else
Only 1 left
Add to cart
Sold going to use for something else
$25
$25
Get this!
+ Add to cart
Used tested the motor good. Same day handling from Long Beach, CA.
Only 25 left
Add to cart
BMW E30 (1984-1991) Ash Tray Into 3-52mm LHD
$20
$20
Get this!
+ Add to cart
For left hand drive will not fit right hand drive. I also have for right hand drive. If you want just two 52mm with no lighter leave a message also have that. 18 gauge thick metal textured black
Only 25 left
Add to cart
2JZ Non Turbo Spark Plug Cover
$75
$75
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart cheaper than Home Depot or Lowe's if you need any touch up. If you want the front left hole block off or custom shoot a message.
Only 25 left
Add to cart
1997 Honda Civic Gauge Pod Holder: Three 52mm & 5 Toggle Switches
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart cheaper than Home Depot or Lowe's if you need any touch up. Brackets and screws provided to mount.
Only 25 left
Add to cart
Honda Civic EK Rear Bumper Diffuser/Vent *CUSTOM PUT YOUR NAME/LOGO
$120
$120
Get this!
+ Add to cart
Bare aluminum same thickness as 18 gauge metal. If you want no logo or DR or you own name/logo send a message I can see your ebay ID. Aimed at the light for the distance and its 4.75 inch high.
Only 25 left
Add to cart
Powerwheels Bare Metal Face Rim *ONE RIM
$17
$17
Get this!
+ Add to cart
You're buying bare metal face rim ONLY one. 18 gauge thick metal bare metal no paint. You paint the color you want. Use the Walmart cake pan the grey one stronger than the black one. Center axle hole is 3/4" or .75 inch for pillow block bearings. 9 in diameter x 1.5 in H (22.9cm x 3.8 cm) cake pan.
Only 1 left
Add to cart
For something new
$100
$100
Get this!
+ Add to cart
There is a back tab to lock down in the back and front use the three stock bolts. 18 gauge thick metal textured black truck bedliner.
Only 25 left
Add to cart
Sprockets Set for DIY Trike 48v Bike Build 24 Teeth & 21 Teeth Chain #
$16
$16
Get this!
+ Add to cart
1/8 thick bare metal you're buying both sprockets to keep the pedal brake to turn into trike with 1" axle. Will update with Bitchute video when done.
Only 25 left
Add to cart
240SX S13 (1989-1993) Whole Middle Panel Plate: Silvia
$30
$30
Get this!
+ Add to cart
Front is bare metal coated high temp satin clear to protect from rust. Back is textured black. Will come with screws. Also have other versions and if you want in black or any special layout shoot me a message. You lay on top of your stock panel. Also have other versions.
Only 25 left
Add to cart
Honda Civic EG Coupe Rear Bumper Vent /Diffuser *Bare Aluminum Set No
$50
$50
Get this!
+ Add to cart
Bare aluminum a set pair you're buying. Best to use bolts with lock nuts NOT provided. This is bigger than normal in the market to look better. Check out Celtic Woman - Fields of Gold, You Raised Me Up, Amazing Grace, Follow On, When You Go. 200 songs list included!
Only 24 left
Add to cart
BMW E30 (1984-1991) Cluster Gauge Holder: 3.375 & Two 52mm LHD
$25
$25
Get this!
+ Add to cart
Textured black truck bed spray paint 18 gauge thick sheet metal. Top goes into stock place and bottom 2 screws provided to go into bottom of dash. Can do RHD if you want.
Only 25 left
Add to cart
Toilet Paper Holder: Vietnam Long Dress
$20
$20
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Also have batman, superman, hello kitty, chihuahua etc.
Only 25 left
Add to cart
240SX S13 (1989-1993) Middle Vent Gauge Holder: LS S13
$15
$15
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
Honda Civic EK Hatch Muffer Heat Shield: Bare Aluminum
$25
$25
Get this!
+ Add to cart
Self tap screws provided. Check out Celtic Woman - Fields of Gold, You Raised Me Up, Amazing Grace, Follow On, When You Go. 200 songs list included!
Only 25 left
Add to cart
240SX S14 (1995-1998) SR20DET Spark Plug Cover: Silvia with Vents
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. You do the bending yourself. Put the four screws on left first but don't tight them down then you push down to mold/contour.
Only 1 left
Add to cart
Nissan 240SX S13 (1989-1993) U.S. Driver Side Side Mirror *USED
$50
$50
Get this!
+ Add to cart
For Nissan 240SX S13 (1989-1993) USED ship next day located in Long Beach, CA. Check out Celtic Woman - Fields of Gold, You Raised Me Up, Amazing Grace, Follow On, When You Go. 200 songs list included!
Only 25 left
Add to cart
BMW E36 Bottom Gauge Holder: Blank Black
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
49cc 4-Stroke Muffler Brace Bracket With 2 Hose Clamps Also fits 80cc
$18
$18
Get this!
+ Add to cart
1/8 thick metal high heat flat black two hose clamps provided. Also have the muffler bracket and the pedal lock bracket up on ebay. Here Bitchute video for more details on the bike: www.bitchute.com/video/TI0Pq6kn2kun/
Only 25 left
Add to cart
49cc 4-Stroke Need One Extra Lock for Pedal Adapter Clamp Provided
$16
$16
Get this!
+ Add to cart
1/8 thick metal high heat flat black clamp included. Here Bitchute video for more details on the bike: www.bitchute.com/video/TI0Pq6kn2kun/
Only 25 left
Add to cart
Bike Lock for Trunk *Bracket Plus Nuts and Bolts
$20
$20
Get this!
+ Add to cart
1/8 thick metal high heat flat black nuts and bolts included. Will also give you one self tap screw to poke hold easier for drill bit. Also have the motor mount, muffler bracket, and one extra pedal lock bracket needed for the pedal adapter for beach cruiser on ebay.
Only 25 left
Add to cart
240SX S14 (1995-1998) Gauge Holder for The Radio: 3-52mm *Black
$17
$17
Get this!
+ Add to cart
Textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Motor Mount with Nuts/Bolts for 49cc Beach Cruiser Bare Metal 1/8 thic
$20
$20
Get this!
+ Add to cart
You're buying the motor mount ONLY 1/8 thick bare metal. Also have the muffler bracket and the pedal lock bracket up on ebay. Here Bitchute video for more details on the bike: www.bitchute.com/video/TI0Pq6kn2kun/
Only 25 left
Add to cart
BMW E30 With E36/E46 Swap Tran Mounting Support Brackets
$25
$25
Get this!
+ Add to cart
1/8 thick bare meal to add two more holes to support the extra power. The bigger gap side goes toward the motor side. Ebay link for more pics but was taken down: www.ebay.com/itm/393251691533
Only 25 left
Add to cart
240SX S13 (1989-1993) U.S. Driver Side Vent ONLY Black: Lines
$10
$10
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
Honda Civic EF 4-Key Holder
$25
$25
Get this!
+ Add to cart
Textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Also have 240SX, E30, E36 etc.
Only 25 left
Add to cart
240SX S13 (1989-1993) Spare Tire Cover for Coupe/Hatch *Aluminum
$160
$160
Get this!
+ Add to cart
Bare aluminum same thickness as 18 gauge thick metal. Pick up can do $100 behind Long Beach Airport California cell five six two two one three eight six four two. Link to ebay for more pics but second account was taken down by ebay: www.ebay.com/itm/393249566501
Only 25 left
Add to cart
BMW E30 (1984-1991) Radio Gauge Holder: 3-52mm
$15
$15
Get this!
+ Add to cart
Textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
Power Tools Rack Custom Kobalt etc: PUT YOUR NAME / LOGO
$75
$75
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
1995 Honda Civic Coupe Turbo Exhaust Hood Vent Plate *Bare Aluminum
$30
$30
Get this!
+ Add to cart
Bare aluminum rivets inluded same thickness as 18 gauge thick metal. Also have sunroof delete etc. Here ebay link for more pics but was taken down by ebay: www.ebay.com/itm/393178159354
Only 25 left
Add to cart
2006 Honda CRV Hood Brackets Set to put Offroad Spot Lights: Brackets
$40
$40
Get this!
+ Add to cart
1/8 thick metal high heat flat black. You're buying a set so two brackets should fit other years too. Here second ebay link for more pics but was taken down by ebay: www.ebay.com/itm/393162582028
Only 25 left
Add to cart
240SX S14(1995-1998) Glove Box Gauge Holder: 3-52mm for RHD Black
$30
$30
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
240SX S13 (1989-1993) Corner Defroster Vent Set 2-Piece
$16
$16
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
240SX S13 (1989-1993) 3-Piece AC Vent Set: Lines
$30
$30
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up. Like on all my gauge holder made it big so just shove in and it stays.
Only 25 left
Add to cart
240SX S13 Hatch Drift Smoke/Fart Ventilator 2-Plate Set
$50
$50
Get this!
+ Add to cart
Aluminum same thickness as 18 gauge metal. The boat ventilator blower not included and its 3" I put a pic which got on ebay. Here link to second ebay account for more pics which was taken down by ebay: www.ebay.com/itm/393160693928
Only 25 left
Add to cart
240SX S13 Cluster Holder 2-Piece Covering:2-3.375&2-52mm
$50
$50
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything. Here second ebay link for more pics which was taken down by ebay: www.ebay.com/itm/393160680030
Only 25 left
Add to cart
Honda 6-Coat Hangar
$60
$60
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Honda Logo 5-Key Holder
$25
$25
Get this!
+ Add to cart
You're buying a textured black one 18 gauge thick sheet metal. I'm using truck bed liner spray paint almost on everything which you can get from WalMart $1.50 cheaper than Home Depot or Lowe's if you need any touch up.
Only 25 left
Add to cart
Clothes Hanger 2 Brackets a Set for 1.5
$75
$75
Get this!
+ Add to cart
1/8 thick metal flat black you're buying ONLY two brackets for one set. 1.5 inch metal pipe not included. You can use Home Depot metal conduit pipe. Link to second ebay account for more pics which was taken down by ebay: www.ebay.com/itm/393158004706
Only 24 left
Add to cart
240SX S13 (1989-1993) On Top Of Radiator Support: SR20DET
$25
$25
Get this!
+ Add to cart
18 gauge thick metal textured black truck bed spray paint. Also have 1JZ, 2JZ leave a message not up on ebay however. Check out Celtic Woman - Fields of Gold, You Raised Me Up, Amazing Grace, Follow On, When You Go. 200 songs list included!
Only 25 left
Add to cart
240SX S13 (1989-1993) Kick Plate Long Version: 240SX
$20
$20
Get this!
+ Add to cart
18 gauge thick metal textured black in the back and front is bare metal coated high satin clear to protect from rust. If you want all black shoot me a message. Two screws provided in case you want to put screws. You're buying one kick plate.
Only 25 left
Add to cart
S13(1989-1993)Top Boot Cover Metal Ring ONLY For The Sifter Vinly
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black. You're buying the ring and two mounting brackets ONLY to put the vinyl when converting from automatic to 5 speed conversion. I'm using truck bed liner spray paint almost on everything if you need any touch up.
Only 24 left
Add to cart
Nissan Z32 4-Key Holder 10" by 5.5"
$20
$20
Get this!
+ Add to cart
18 gauge thick metal textured black truck bed spray paint. Ebay is restricted for not updating to new ebay managed payments bank account so can't upload over there. Also have 240SX, E30, E36 etc. here ebay link: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2
Only 25 left
Add to cart
Honda Civic EG (1992-1995) 4-Key Holder 9.25" by 6"
$25
$25
Get this!
+ Add to cart
18 gauge thick metal truck bed textured black. Screws provided also have 240, E30, E36 etc. Leave your address so I can ship it. Will send you tracking in Paypal. Link to ebay can't update over there: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2
Only 25 left
Add to cart
Nissan 240SX S14 (1995-1998) Gauge Holder for The Radio: 3-52mm *Black
$17
$17
Get this!
+ Add to cart
18 gauge thick metal truck bed textured black. Will send you tracking in Paypal or shoot a text. Link to ebay can't update over there: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2Link on ebay for more pics but all sold out: www.ebay.com/itm/123703511293
Only 25 left
Add to cart
Acura NSX Second Version 2-Key Holder
$25
$25
Get this!
+ Add to cart
18 gauge thick metal textured black truckbed spray paint. Also have Acura Integra, E30, E36 etc. there more on ebay but can't update ebay.
Only 25 left
Add to cart
RB25DET Spark Plug Cover: 2
$50
$50
Get this!
+ Add to cart
18 gauge thick metal textured black truck bed. Link to ebay can’t update over there still running on Paypal instead of bank account so account restricted: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2
Only 25 left
Add to cart
Nissan 240SX S13 (1989-1993) Whole Middle Plate: 240SX White
$30
$30
Get this!
+ Add to cart
18 gauge thick metal textured black truck bed the over with white. Link to ebay can’t update over there still running on Paypal instead of bank account so account restricted: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2
Only 25 left
Add to cart
Nissan 240SX S13 (1989-1993) Middle Vent: Dual 52mm RB
$15
$15
Get this!
+ Add to cart
18 gauge thick metal textured black truck bed. Link to ebay can't update over there still running on Paypal instead of bank account so account restricted: www.ebay.com/sch/thaison1864/m.html?_nkw=&_armrs=1&_ipg=&_from=&rt=nc&_dmd=2
Hey 👋 I just created a page here. You can now buy me a coffee!
Show more
RECENT SUPPORTERS
$
Become a member
Support ThaisonNguyen
You’ll be charged
PAY WITH
Payment details
Payment Processing…
Follow ThaisonNguyen
Check your inbox
We emailed a magic link to . Click the link to confirm your follow.
We found your account and emailed a magic link to . Click the link to confirm your follow.
Are you sure?
Switching to a new level will terminate your current membership. You will no longer have access to this level or its rewards.
Contribute
The maximum amount left to fund this is $29