Going through some of the bad parts of the design and how I feel that I've improved mine. Then maintaining the cast iron surface with Renaissance Wax and more interest fixes. Lastly on to some safety procedures that I use.
Here's the video https://youtu.be/ptGQvFrO6cY 
And my review is here below.
So what do I think of the Record Power ts250c? Well, I've not been to any shows or seen any other table saw since. But from what I've heard. There's a lot more choice now its over £1200.00. Some have solid cast tables all round and therefore the T-slot would probably be more accurate to use, than the T slot in a moving table. I've changed the main bearings twice. 2014 & 2016. And I've looked after it. I wish the power lead was 2ft longer to make it easier to position without using an extension lead sometimes. And removing/replacing the riving knife is my biggest bugbare. No thought went into this design at all. Shame. I've a couple more adjustments and things to makes easier.
I would say Its still 'good'
.
Outtakes at the end 🙈😂
#recordpower #tablesaw
These videos don't make themselves and do take time. If you would like to support me I would very much appreciate your help.
I've now got a 'Thanks $' under each video
Not all YouTube videos get this opportunity. So, I see that as they want to help me move forward. You can support £2, £5, £10 or £50 which helps me out.
One-off donation:https://www.paypal.me/TWCabinetMaker
(please choose "Personal" rather than "Purchase" else PayPal charge a transaction fee.)
Buy Me a Coffee is a method of supporting me too.
https://www.buymeacoffee.com/twcmaker
The Bio.link below takes you to my other accounts on Twitter, Instagram, blog & podcasts etc.
My email is [email protected] if you need to get in touch.
I use my Huawei P30Pro (phone) for filming, sound and editing. So please try not to be too critical.
Be kind.
Thank you
Jamie